弹簧垫圈,Spring washer
1)Spring washer弹簧垫圈
1.The method of using Intelligent Sampling Unit and fuzzy control to achieve the adaptive unripple control in spring washer packing,is described.介绍了用智能采样、模糊控制来实现弹簧垫圈定量自动包装自适应少节拍、无波纹控制的方法。
2.In view of the heavy-duty galvanized spring washer for passenger dedicated railway line of turnouts occurs the sudden fracture when pre-tightening,in this paper the macro-fractography,chemical composition,mechanical properties and microstructure of the spring washer are analyzed.针对客运专线铁路道岔用重型镀锌弹簧垫圈在预紧时发生突然断裂,通过对弹簧垫圈的宏观断口、化学成分、机械性能和显微组织进行分析。
3.In order to improve velocity and efficiency of drawing with the SolidWorks software,this paper introduces a specific method and procedure of 3D serial part model design of common thread linkers,such as hex nut and spring washer,etc.为提高在SolidWorks软件中绘图的速度和效率,该文依据我国最新国家标准,采用SolidWorks软件中产品设计系列化功能,利用系列零件设计表介绍了在SolidWorks平台上进行六角头螺母、弹簧垫圈等常见螺纹连接件三维系列化模型设计的具体方法和步骤,为实现产品设计的快速调整和系列化提供理论基础。
英文短句/例句
1.Specifications for spring washers--Single coil spring lock washersGB/T94.1-1987弹性垫圈技术条件弹簧垫圈
2.Single coil spring lock washers--Normal typeGB/T93-1987标准型弹簧垫圈
3.Curved single coil spring lock washersGB/T7245-1987鞍形弹簧垫圈
4." Single coil spring lock washers, Heavy type"GB/T7244-1987重型弹簧垫圈
5." Single coil spring lock washers,Light type"GB/T859-1987轻型弹簧垫圈
6.Wave single coil spring lock washersGB/T7246-1987波形弹簧垫圈
7." Hexagon head bolt, single coil spring lock washer and plain washer assemblies""GB/T9074.17-1988六角头螺栓,弹簧垫圈和平垫圈组合件"
8.Hexagon head bolt and single coil spring lock washer assembliesGB/T9074.15-1988六角头螺栓和弹簧垫圈组合件
9.Single coil spring lock washer for assemblyGB/T9074.26-1988组合件用弹簧垫圈
10.Trapezed steel wire for spring washerGB/T5222-1985弹簧垫圈用梯形钢丝
11.The Safety Role of the Spring Lock Washers in the Transmission & Distribution Line弹簧垫圈在输配电线路中的安全作用
12." Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies""GB/T9074.4-1988十字槽盘头螺钉,弹簧垫圈和平垫圈组合件"
13." Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies"GB/T9074.8-1988十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件
14." Cross recessed hexagon bolt with indentation, single coil lock washer and plain washer assemblies""GB/T9074.13-1988十字槽凹穴六角头螺栓,弹簧垫圈和平垫圈组合件"
15.Cross recessed pan head screw and single coil spring lock washer assembliesGB/T9074.3-1988十字槽盘头螺钉和弹簧垫圈组合件
16.Cross recessed small pan head screw and single coil spring lock washer assembliesGB/T9074.7-1988十字槽小盘头螺钉和弹簧垫圈组合件
17.Sliding Mode Variable Structure Control of Spring-washer"s Expert Milling-machine滑模控制在弹簧垫圈圆切刀磨床上的应用研究
18.Cross recessed hexagon bolt with indentation and single coil spring lock washer assembliesGB/T9074.12-1988十字槽凹穴六角头螺栓和弹簧垫圈组合件
相关短句/例句
spring-washer弹簧垫圈
1.In this paper,the intelligent electronic-scale controller composed of 8031 SCM ofspring-washer packing system is introduced.本文介绍了以单片机8031为核心的智能电子秤在弹簧垫圈定量自动包装线上的实现方法。
2.In this paper,the intelligent controller ofspring-washer packing system is introduced.本文介绍了弹簧垫圈智能包装控制系统 ,给出了系统的硬件结构 ,提出了对两个关键技术问题的解决方法。
3)Spring Washer,Retaining Washer弹垫,弹簧垫圈
4)round spring washer弹簧圆垫圈
5)double coil spring lock washer双圈弹簧垫圈
6)open washer(1)开口垫圈(2)弹簧垫圈
延伸阅读
垫圈分子式:分子量:CAS号:性质:具有缓冲、减震和密封等作用的薄圆片形零件。用于仪表、仪器、电工和机械管道等设备,以及瓶盖、罐盖和桶盖上。能起防震、减少机件磨损、密封等作用。根据使用条件,可由金属、橡胶、石棉以及其他材料制成。有的金属垫圈仅有增加接触面积,改善接触状况的作用,垫在螺母(或螺栓头)与其所连接的零件之间。特殊的垫圈如弹性垫圈,有防止螺栓和螺母松动的作用。
如果觉得《弹簧垫圈 Spring washer英语短句 例句大全》对你有帮助,请点赞、收藏,并留下你的观点哦!