动模斜顶,angle ejecting at the moving half
1)angle ejecting at the moving half动模斜顶
1.The service life and reliability of the mould are improved with the integration ofangle ejecting at the moving half and core-pulling by angle pin and the application of two-step ejection mechanism improves the product quality.分析了手机外壳塑件成型工艺,详细阐述了手机外壳注射模结构设计要点与工作过程,通过采用动模斜顶与斜导柱抽芯相结合的抽芯机构,使模具寿命和可靠性大为提高;为提高塑件质量,采用了二次顶出机构;并重点阐述了动模斜顶、斜导柱抽芯机构和二次顶出机构的设计要点。
2)driven angled ejecting mechanism被动式斜顶机构
1.Application ofdriven angled ejecting mechanism in injection mould;被动式斜顶机构在模具中的应用
3)tilt mandril斜顶
1.According to the structure of the product, the unique asymmetrictilt mandril of the core side-pulling mechanism and the cool- ing system made up of channel and deep cavity are designed, which increases the ability of cooling and ensures that the product can be successfully taken out from the injection mould.根据产品的结构,设计了独特的横向斜错位非对称斜顶侧向抽芯机构和深水孔加冷却水道的冷却系统,提高了模具的冷却效果,确保了产品顺利脱模。
2.According to the structure of the product,the uniquetilt mandril and side-slug of the core side-pulling mechanism were designed,which ensured that the product could be taken out from the injection mould.根据塑料件的结构,重点设计了两凹槽的斜顶侧向抽芯机构和斜导柱滑块抽芯机构,保证了塑料件的顺利脱模。
3.In order to achieve the four-direction pulling core,the specialtilt mandril was designed according to the product structure,which simplized the injection mould structure.根据产品结构,应用斜顶机构实现了产品四向侧抽芯,简化了模具结构,降低了制造成本。
英文短句/例句
1.crestal collapse fracture背斜顶部的塌陷裂缝
2.A shed or sloping roof attached to the side of a building or wall.斜棚附着在建筑物边缘或墙上的棚或斜顶
3.Flat roofs are basically either shed or lean-to roofs.平屋顶基本上是单坡屋顶和单斜屋顶.
4.a pitched rather than a flat roof.倾斜的而不是平的屋顶。
5.A low-pitched roof.一个倾斜缓慢的屋顶
6.degree of slope(esp of a roof)倾斜度（尤指屋顶的）.
7.The roof slants upwards from left to right.屋顶从左向右朝上倾斜。
8.usually with a sloping top.通常有一个倾斜的顶面。
9.The slopes of the roofs are shown in the figure.图中表示出顶部的斜度。
10.The roof of the house pitched at a 45°angle.屋顶倾斜四十五度。
11.Our roof has a slight slant.我们的屋顶稍微倾斜。
12.The roof pitches sharply.那个屋顶倾斜得厉害。
13.He ran up the slope to the top of the hill.他爬上斜坡到了山顶。
14.a gabled extension built out from a sloping roof to accommodate a vertical window.屋顶斜坡上凸出的天窗。
15.a big barn with a gambrel roof.有着复斜屋顶的大谷仓。
16.The path climbed all the way to the top of the hill.小道一路上斜到山顶。
17.One of the sloping beams that supports a pitched roof.椽支撑起一个斜屋顶的斜梁中的一根
18.a roof having sloping ends as well as sloping sides.既有斜坡屋面又有斜坡屋头的屋顶。
相关短句/例句
driven angled ejecting mechanism被动式斜顶机构
1.Application ofdriven angled ejecting mechanism in injection mould;被动式斜顶机构在模具中的应用
3)tilt mandril斜顶
1.According to the structure of the product, the unique asymmetrictilt mandril of the core side-pulling mechanism and the cool- ing system made up of channel and deep cavity are designed, which increases the ability of cooling and ensures that the product can be successfully taken out from the injection mould.根据产品的结构,设计了独特的横向斜错位非对称斜顶侧向抽芯机构和深水孔加冷却水道的冷却系统,提高了模具的冷却效果,确保了产品顺利脱模。
2.According to the structure of the product,the uniquetilt mandril and side-slug of the core side-pulling mechanism were designed,which ensured that the product could be taken out from the injection mould.根据塑料件的结构,重点设计了两凹槽的斜顶侧向抽芯机构和斜导柱滑块抽芯机构,保证了塑料件的顺利脱模。
3.In order to achieve the four-direction pulling core,the specialtilt mandril was designed according to the product structure,which simplized the injection mould structure.根据产品结构,应用斜顶机构实现了产品四向侧抽芯,简化了模具结构,降低了制造成本。
4)lifter[英]["lift?][美]["l?ft?]斜顶
1.Analyzed the processing characteristics of product,determined the gate location by simulating the molding process of clutch through MoldFlow,designed thelifter structure and two-parting plane mold structure,descripted the mold\"s work process.模具为三板式点浇口结构,采用成型斜顶杆方式实现了模具抽芯要求,并完成了模具结构设计。
5)angle ejector斜顶
1.Introduced a inner ejection pin inangle ejector structure that prevent product pulling pulling injury and displacement.介绍了一种从斜顶内顶杆顶出,防止产品拉伤、位移的基本结构。
2.By process analysis of the complexangle ejector,proposed a way for manufacturec omplexangle ejector via adjusting the machine order for mold parts,put forward a manufacturep rocess forangle ejector,solved the manufacture problem concerning a unsymmetrical anglee jector with different slope in each side,and as a result,realized efficient manufacture of anglee jector.通过对复杂斜顶零件的加工工艺研究,提出了合理安排模具零件的加工顺序及加工复杂斜顶零件的方法,制定了斜顶零件的加工工艺过程,解决了四面具有斜度的不对称斜顶零件的加工问题,实现斜顶零件高效、快速地加工。
6)pitched roof斜顶;斜尖屋顶
延伸阅读
被动式说明主语所表示的人或事物是被动者的语法格式。汉语的被动式有时没有形式上的标志，如：他选上了ㄧ麦子收割了。有时在动词前边加助词‘被’，如：反动统治被推翻了。有时在动词前边加介词‘被’，引进主动者，如：敌人被我们歼灭了（口语里常常用‘叫’或‘让’）。
如果觉得《动模斜顶 angle ejecting at the moving half英语短句 例句大全》对你有帮助，请点赞、收藏，并留下你的观点哦！
